JEEP PRODUCTS > REAR BUMPER
 
Available for:
76-86 CJ, 87-95 YJ, All TJ

Description:
The Hanson rear bumper is a strong, supportive 60" wide bumper that can be expanded upon with a tire carrier and cargo racks at a later time, if needed.  If bought without the tire carrier, a 3/4" x 1" rectangular hole and a 1 5/16" round hole will be left in the top of the bumper for adding the carrier later.  Adding the carrier later will require welding in a spindle and rubber anti-rattle button tab.  

The bumper has a 45 angle on the underside to help increase departure angles.  A 2" reciever is also incorporated into the bumper.

All models come with all necessary hardware and a lower strap that attach the lower bumper flange to the bottom of the frame rails. YJ and TJ models come with straps to link the upper bumper flanges to the upper frame rail.  Backing plates supplied on all models for extra support behind the rear crossmember to help distribute the mounting pressure.  98 and newer TJ's will need to drill out 4 inner rear crossmember holes.  If the backing plates are welded in, the fuel tank should be removed for safety.

All products shipped bare steel.  Powder coating available at an additional cost.

Available Options:
D Rings
Shackle Tabs

Construction:
Bumper: 3/16" Hot Rolled Steel
Shackle Tabs: 1" Hot Rolled Steel
D Rings: 1/2" size, 4,000 lb. rating

Pricing:
CJ, YJ & TJ: $325.00
Rear bumper and tire carrier combo: $720.00
Shackle Tabs w/ 7/8" Hole: $60.00
D Rings per Pair : $45.00

Rear Bumper - Click for larger picture

D RingShackle Tab (with shackle)